CODE 51 MEM-CAL ERROR (faulty or incorrect mem-cal)

Please help me test this Wiki. If we decide to change it later we can easily copy and paste this content into another format.

Moderator: Wiki Moderator

Post Reply
steveX

CODE 51 MEM-CAL ERROR (faulty or incorrect mem-cal)

Post by steveX » Sun Apr 20, 2008 5:25 pm

CHECK THAT ALL PIN ARE FULLY INSERTED IN THE SOCKET. IF OK, REPLACE MEM-CAL, CLEAR MEMORY AND RECHECK. IF CODE 51 REAPPEARS, REPLACE ECM

NOTICE: To prevent possible eletrostatic discharge damage to the ECM or MEM-CAL, do not touch the component leads. Do not remove intergrated circuit from carrier.


SOURCE: GM SERVICE MANUAL.

Post Reply